Smooth and Flutted 4”, 6” & 8” Post Wrap installs easily in several steps. To install you will need:
- Measuring tape
- PVC Cement (optional)
- Saw with a fine tooth blade
- Roofing nails recommended
- Safety Goggles recommended
Step 1Measure and Cut Post Wrap:
Measure the length of Post Wrap needed and cut to length using a fine tooth saw.
Step 2Attach Post Wrap
Place the first piece of Post Wrap against the post and fasten using roofing nails through holes provided on the fastening flange. Insert the flat end of the second piece of Post Wrap into the assembly slot of the first piece. Again, attach to the post using roofing nails in the holes provided on the fastening flange. Repeat the previous step to fasten the third piece of Post Wrap. Do not nail tight.
Step 3Complete Installation
When attaching the last piece of Post Wrap, once again begin by inserting the flat end into the assembly slot of the previous piece. Next, slide the slot of the fourth piece over the flat end of the first piece. In most applications the Post Wrap will be secure, but PVC Cement may be used. Trim post with Adjustable Post Collar, sold separately.
More information on post wraps is available here.