Yes, you can cut rails using a miter saw. We recommend using a 10-inch 82 carbide blade. For more installation instructions, visit our resources page - https://upsidebycolorguard.com/resources/ .

Are caps and collars available for the 2x4 vinyl post sleeve?

Color guard does make a 2x4 vinyl post sleeve, available in white, tan, and clay. However, we do not manufacture a cap or collar for that sleeve.

FAQs Archive | UpSide Deck Ceiling

Q: Will aluminum railing rust?

Because of the properties of aluminum, it should not rust. Plus, our products are coated to resist corrosion.

Q: How far can I span between posts?

Deck posts should be no further than 8 feet apart. Keep in mind that all Color Guard rails are true to length (6 feet is 6 feet).

Q: What angle should my stairs be?

Stair codes and guidelines prefer an angle of around 37° for normal stairways and around 7° for ramps. There is, of course, some wiggle room in that, which is why our vinyl stair brackets accommodate 23-38 degrees, and our aluminum line can accommodate up to 38 degrees.

Q: Do I need to meet code if I am not having my deck inspected?

Yes! Just because you are not planning on getting your deck inspected, it needs to be built to code. We have an entire post on the subject here: https://upsidebycolorguard.com/do-i-need-a-deck-rail/

Q: Can Post Wrap be painted?

We do not recommend painting our product as we have not done any testing regarding that process. Some installers have reported painting Post Wrap with a 100% acrylic bonding primer and a water-based finish coat. But, again, we have not tested this and would not recommend painting. We recommend going to your local paint store and asking for their input. Painting products could void any warranty.